How to switch the perspective with the Curve Generator?

For Descent, Descent II and Descent3 level editing and modification assistance.
Post Reply
User avatar
Xfing
DBB Fleet Admiral
DBB Fleet Admiral
Posts: 2021
Joined: Mon Jun 15, 2009 3:03 am
Location: Ringing Satan's Doorbell

How to switch the perspective with the Curve Generator?

Post by Xfing »

The curve generator in DLE is a very helpful tool, and I've got it figured out for the most part, except for one thing. When you're editing a curve, you've got those two red lines that you can adjust with Ctrl+8 or 9 to add or remove cubes. But I can only seem to be able to edit the line from the side I activated the curve generator on. How to switch to the opposite end of the tunnel?
Descent 1,5: Level layouts done: 52/54 Secret level layouts done: 1/6
User avatar
Sirius
DBB Master
DBB Master
Posts: 5616
Joined: Fri May 28, 1999 2:01 am
Location: Bellevue, WA
Contact:

Re: How to switch the perspective with the Curve Generator?

Post by Sirius »

I had a look at 1.12.4... it appears you can just switch to the "other segment" (spacebar) and use Ctrl+8/9 from there to adjust the other end. Is that not working for you?
User avatar
Xfing
DBB Fleet Admiral
DBB Fleet Admiral
Posts: 2021
Joined: Mon Jun 15, 2009 3:03 am
Location: Ringing Satan's Doorbell

Re: How to switch the perspective with the Curve Generator?

Post by Xfing »

Sirius wrote:I had a look at 1.12.4... it appears you can just switch to the "other segment" (spacebar) and use Ctrl+8/9 from there to adjust the other end. Is that not working for you?
Never tried it to be honest :D It should work though, now that you've mentioned it.
Descent 1,5: Level layouts done: 52/54 Secret level layouts done: 1/6
Post Reply