UPS - computer starting up after being shut down?

For system help, all hardware / software topics NOTE: use Coders Corner for all coders topics.

Moderators: Krom, Grendel

Post Reply
User avatar
thewolfe
DBB Admiral
DBB Admiral
Posts: 1987
Joined: Tue Nov 05, 2002 3:01 am
Contact:

UPS - computer starting up after being shut down?

Post by thewolfe »

A friend said that since she started using a UPS her computer starts up after an hour or more after shutting it down.

Is that possible?
User avatar
Krom
DBB Database Master
DBB Database Master
Posts: 16043
Joined: Sun Nov 29, 1998 3:01 am
Location: Camping the energy center. BTW, did you know you can have up to 100 characters in this location box?
Contact:

Re: UPS - computer starting up after being shut down?

Post by Krom »

Did they read the documentation?
Did they understand the documentation?
Why are they using a UPS if they turn off the computer?
User avatar
thewolfe
DBB Admiral
DBB Admiral
Posts: 1987
Joined: Tue Nov 05, 2002 3:01 am
Contact:

Re: UPS - computer starting up after being shut down?

Post by thewolfe »

She is going to send me the mfg and model. She got it because the power is off and on a lot in her area.
User avatar
Warlock
DBB 3D Artist
DBB 3D Artist
Posts: 3370
Joined: Wed May 12, 1999 2:01 am
Location: Midland, Tx, U.S.
Contact:

Re: UPS - computer starting up after being shut down?

Post by Warlock »

I know some ups's have a data port on them that some times is a usb cable does hers have that on there and if so is it plug in? If so have her remove it
User avatar
Capm
DBB DemiGod
DBB DemiGod
Posts: 2267
Joined: Thu Nov 05, 1998 12:01 pm
Location: Topeka, KS
Contact:

Re: UPS - computer starting up after being shut down?

Post by Capm »

Its likely that if the cable is hooked up and the software was installed, then there could be a setting in there that turns on the computer at a specific time for one reason or another, however I would think that you could prevent that by turning off a "wake on usb" function in the systems bios, or by simply turning off the setting in the UPS software.

Frankly, the only time I'd have the cable hooked up is when you're setting the tolerance settings in the UPS. Once those are set, there really isn't a need to keep the usb plugged in or the software running unless they just want to keep track of what their power is doing. Depends on how bad the power is.
--------------
----------
---Capm
http://www.midnightsquadron.com
Post Reply